Home / Tile Floors / vinyl flooring that looks like ceramic tile / Full Ceramic Wood Tile Pros And Cons Vinyl Flooring Looks Like Luxury Room That Porcelain Look Effect Armstrong Outdoor Planks Dark Premium Kitchen Floor Lino Grain
ggpk Tile Floors July 14th, 2018 - 08:05:49
Tile floor installation is a clear-cut process. Once your contractor has determined your sub-floor can handle the weight and rigidity of tile. he designs a "map" so that the tile is straight. Next. adhesive is spread. and the tiles are "squished" into it. A level is used on each tile to make certain it is flush. and a rubber mallet can tamp down any spot that`s higher than the rest. Spacers are placed between tiles. until the adhesive dries them into place. Border tiles are cut to size and laid. The spaces are grouted. and when it is dry the tiles are cleaned. and sealed.
What`s the property owner`s risk tolerance? Does he/she want to be rock solid sure of the stability of the floor? Even if that means spending extra money and/or time to reinforce the floor. and accepting a floor that may sit higher than surrounding floors? Or is some risk of failure acceptable if the floor is not built to the righteous standards of the TCNA? Sometimes the extra effort is not worth the cost to the property owner. who should be fully informed on all options. Contractors who install flooring shouldn`t assume that clients don`t care enough to solve the problem: in the last year we`ve had two clients who spend thousands of extra dollars to reinforce subfloors in a kitchen and laundry room when we explained that their floors were too unstable for tile. They really wanted tile. and were willing to make the subfloor ready for it. even if it cost more.
Fine. but how do you know if your floor meets the L/360 standard? We face this in the field all the time. but in remodeling. there`s not always a clear answer. There are published tables for calculating deflection. (including a really cool online calculator at http://www.johnbridge.com/vbulletin/deflecto.pl ) but they assume you have full knowledge of how the floor was built. To be able to use the engineering tables. you`d need to know how far apart the joists are. the length of the unsupported span. how thick the joists are. what type of wood and in what condition the wood is in. as well as how thick the plywood is. if any. Realistically. if all of this flooring is hidden by finished ceilings below and covered over by old flooring layers above. educated guessing takes center stage. The following questions help to determine floor stiffness using common sense guidelines
What floor covering was on the floor before? If it had ceramic tile or stone. and the floor received reasonable traffic for years with no cracking or broken grout. it`s a pretty good bet that the subfloor is up to the job. If it was vinyl. carpet or hardwood. we are still in the dark.