ggpk Tile Floors July 25th, 2018 - 08:17:39
For plywood subfloors. be sure that the wood is at least 1 and 1/8 inches thick and is supported by an equally strong underlayment. Otherwise. your ceramic tiles will dislodge easily. or worse. break and need replacing. Concrete floors are the most ideal subfloor surface to work with. But before you can start installing ceramic tile flooring over it. it must be cleaned thoroughly. For dust and other debris. sweep and then mop your concrete subfloor surface. and allow it to dry completely. Smooth concrete surfaces must be rough sanded just like vinyl floors to allow the tiling mortar some grip.
There are at least five good reasons tile surpassed linoleum as the flooring of choice: As you have just read. it is straightforward to install. You`ll be delighted with the efficiency of tile floor installation. It`s not unusual to lay a kitchen in less than one day. a bath in half that time. An expert tile contractor has fit and detail foremost in mind. and will never rush. but experience contributes efficiency to your project.
Does the floor feel bouncy? If so. it is. Trust your instincts. It`s not ready for tile. A well built subfloor feels very stiff underfoot. Squeaking can also be a bad sign. but it may also solvable by screwing down the planks or plywood better into the joists.
How thick is the subfloor and what is it made of? In new construction. ¾ inch plywood or Oriented Strand Board is a standard subfloor over joists that are 16 inches on center apart. We find that is almost never enough to meet the deflection standards in most homes. Other times there is old plank flooring beneath a layer of plywood. This is a wild card. since the engineering tables usually don`t include the value for planks in their calculation. but common sense says it does add some stiffness.