Home / Tile Floors / laminate flooring that looks like ceramic tile / Tile That Looks Like Wood Floor Look Ceramic Laminate Flooring Surripui Grain Inexpensive Textured Sale Vinyl Tiles Pergo Engineered Oak Timber Plank
ggpk Tile Floors July 12th, 2018 - 17:47:17
Is there an unfinished ceiling below to look up and measure the distance between joists and the condition of the wood below and how long the unsupported span is? A few minutes in the basement with a flashlight and tape measure can let you know if you have a winner (thick and deep joists. spaced closely together. in good condition. with a narrow span). or a loser (thin and shallow joists. irregularly spaced or spaced far apart. in bad condition. with a long span).
The need for repair is rare. but it`s easy to have damaged tile replaced. Ceramic is strong. but it has been known to break when significant weight is accidentally dropped on it. Replacement is as simple as removing broken pieces. laying replacement tile. adding new grout to the area. and perhaps new sealant. Keep a few tiles around so that they match if needed. The occasional wipe or mop begins and ends the care-free maintenance of ceramic tile. The sealant that was applied during tile floor installation made it impervious to water and stain. Ceramic tile comes as close to requiring no upkeep as any flooring available. Of course. tile needs regular cleaning. Because it is impenetrable to water. tile patios and utility spaces can literally be hosed down. You only need standard off-the-shelf cleaning products.
How thick is the subfloor and what is it made of? In new construction. ¾ inch plywood or Oriented Strand Board is a standard subfloor over joists that are 16 inches on center apart. We find that is almost never enough to meet the deflection standards in most homes. Other times there is old plank flooring beneath a layer of plywood. This is a wild card. since the engineering tables usually don`t include the value for planks in their calculation. but common sense says it does add some stiffness.
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation. you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks. you must repair them. If any crack is too large to repair. that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.