ggpk Tile Floors July 12th, 2018 - 17:46:55
Does the floor feel bouncy? If so. it is. Trust your instincts. It`s not ready for tile. A well built subfloor feels very stiff underfoot. Squeaking can also be a bad sign. but it may also solvable by screwing down the planks or plywood better into the joists.
What condition does the wood appear to be in? Even if the amount of wood support seems adequate according to the tables. if it appears to have been water damaged. if sections of it look moldy or corroded due to rot or decay. it`s not doing its job. Options include replacing or reinforcing it. but not just ignoring it. Also. has it been cut into in various spots. such as a plumber cutting sections of the joists for positioning pipes? All of these problems can make the wood less effective.
Measure Everything. The next step of your ceramic tile flooring installation is the accurate measuring of your floor and your tiles. This is necessary for you to be able to calculate exactly how many tiles you will need. You must measure the length and width of the section of floor you are going to tile and also the length and width of each tile. Then you must calculate. using these numbers. exactly how many tiles you are going to use. which will depend on the orientation of each tile as you have decided to place it on the floor. as well. Then you must find the mid-points of the length and the width of the floor you want to carry out your ceramic tile flooring installation process on; connect these midpoints to form a plus across the floor space. The intersection of the two lines of the plus is the center of your floor space; it is here that you must begin your ceramic tile flooring installation.
The first thing to do is to make sure that the tools you will use are ready at hand. These tools should include basic carpentry tools like an accurate measuring tape. a carpenter`s square and a bubble level. You should also be prepared with the tiles and all you need to space them and put them together: tile spaces. a tile cutter. a trowel. and a putty knife. Then you must get your adhesives ready: tile bonding material. thin set mortar or tile adhesive. the sealant. the grout and a rubber grout float. Also you must make sure that you are wearing work clothes or overalls. glasses and heavy-duty gloves for safety.