Home / Tile Floors / laminate flooring that looks like ceramic tile / Hi Ceramic Tile That Looks Like Wood Concrete Flooring Ideas L Laminate Porcelain Planks Cheap Solid Cherry Installation Floor Tiles Imitation Gray Look Stone Best
ggpk Tile Floors July 12th, 2018 - 17:42:12
How thick is the subfloor and what is it made of? In new construction. ¾ inch plywood or Oriented Strand Board is a standard subfloor over joists that are 16 inches on center apart. We find that is almost never enough to meet the deflection standards in most homes. Other times there is old plank flooring beneath a layer of plywood. This is a wild card. since the engineering tables usually don`t include the value for planks in their calculation. but common sense says it does add some stiffness.
Tile floor installation is a clear-cut process. Once your contractor has determined your sub-floor can handle the weight and rigidity of tile. he designs a "map" so that the tile is straight. Next. adhesive is spread. and the tiles are "squished" into it. A level is used on each tile to make certain it is flush. and a rubber mallet can tamp down any spot that`s higher than the rest. Spacers are placed between tiles. until the adhesive dries them into place. Border tiles are cut to size and laid. The spaces are grouted. and when it is dry the tiles are cleaned. and sealed.
Knowing the kind of subfloor you`ll be installing ceramic tile flooring over is important. There are three main types of subfloors you might encounter: Vinyl. plywood. and concrete floors. Installing ceramic tile flooring directly to your vinyl or linoleum subfloor surfaces is greatly discouraged. One. it may contain asbestos fibers; and two. vinyl flooring is not a solid as good ol` concrete flooring. When installing ceramic tile on vinyl. experts would recommend rough-sanding. or scarifying. the vinyl floor surface first so your tiling mortar has good grip to set on.
What condition does the wood appear to be in? Even if the amount of wood support seems adequate according to the tables. if it appears to have been water damaged. if sections of it look moldy or corroded due to rot or decay. it`s not doing its job. Options include replacing or reinforcing it. but not just ignoring it. Also. has it been cut into in various spots. such as a plumber cutting sections of the joists for positioning pipes? All of these problems can make the wood less effective.