ggpk Tile Floors July 12th, 2018 - 17:36:40
Ceramic Tile Flooring - Remodeling Over Wood Subfloors. Before you can install a ceramic tile or stone floor. you need to know if the subfloor is even capable of supporting tile. Simply put. tile can be a durable. low maintenance. beautiful floor choice...if it`s on a solid substrate. Or it can be an expensive mistake that cracks. breaks and requires multiple repairs that may never work if the subfloor is not prepared correctly. What factors do you need to look out for to decide if tile is right for your project. and what steps can be taken to insure a trouble free installation?
One of the most traditional flooring ideas to go for is using terracotta tiles. You can get a handcrafted look for your floors with this kind of tile. You can use it in the regular square shape or get ones in octagon shapes. etc. Put a picture on your floors with mosaic tiles. You can make a pattern or lay them out randomly for a unique design. Lastly. you`ve got glass tiles. These can be used as tile flooring ideas to give a quality finished look to any room.
Ceramic Tile Flooring Installation - How to Get it Right by Yourself. Before you can begin your ceramic tile flooring installation. you must make sure that the tiles you have chosen are well-suited for the section of the house you are going to use them for. Ceramic tile flooring is resistant to moisture. water spillage and sudden extreme changes in temperature and are usually used in bathrooms or kitchens. and sometimes in other areas of the house as well. Once you have made sure of the section of flooring that you will use ceramic tiling for and also the tiles that you want to use - you are ready to begin.
There are formulas used in the industry to determine if the subfloor has excessive `deflection` [bounciness. lack of rigidity]. The most cited one is the Tile Council of North America standard for deflection. which is stated as L/360 as a minimum. before tile underlayment is installed. L/360 means that the floor should not bend under weight more than the length (expressed in inches) of the unsupported span divided by 360. For example. if the span between supports runs for 20 feet then the deflection should not be more than 2/3" between the center and the end. L=20 x 12" = 240". L/360 = 240"/360 or 2/3". So 2/3" is the maximum amount of movement the center of the span should be allowed to move.