Home / Tile Floors / ez flex interlocking recycled rubber floor tiles / Interlocking Rubber Floor Tiles Mats Ez Flex Recycled Black And For Basement Garage Flexible Foam Pvc Lock Flooring Canada Bathroom Lowes Tile Tumbling Home
ggpk Tile Floors July 09th, 2018 - 18:06:59
Does the floor feel bouncy? If so. it is. Trust your instincts. It`s not ready for tile. A well built subfloor feels very stiff underfoot. Squeaking can also be a bad sign. but it may also solvable by screwing down the planks or plywood better into the joists.
How thick is the subfloor and what is it made of? In new construction. ¾ inch plywood or Oriented Strand Board is a standard subfloor over joists that are 16 inches on center apart. We find that is almost never enough to meet the deflection standards in most homes. Other times there is old plank flooring beneath a layer of plywood. This is a wild card. since the engineering tables usually don`t include the value for planks in their calculation. but common sense says it does add some stiffness.
Can you cut into the layers on top to get a cross section of the existing floor? If there is a heating grate that you can remove. that may show the layers the floor is composed of. What will be reassuring to see is a thick layer. ideally over 1 ½ inches thick of plywood. Alternatively. with the property owner`s permission. we sometimes cut in to it to check what it`s composed of.
Tile floor installation is a clear-cut process. Once your contractor has determined your sub-floor can handle the weight and rigidity of tile. he designs a "map" so that the tile is straight. Next. adhesive is spread. and the tiles are "squished" into it. A level is used on each tile to make certain it is flush. and a rubber mallet can tamp down any spot that`s higher than the rest. Spacers are placed between tiles. until the adhesive dries them into place. Border tiles are cut to size and laid. The spaces are grouted. and when it is dry the tiles are cleaned. and sealed.