ggpk Tile Floors July 09th, 2018 - 17:52:06
How thick is the subfloor and what is it made of? In new construction. ¾ inch plywood or Oriented Strand Board is a standard subfloor over joists that are 16 inches on center apart. We find that is almost never enough to meet the deflection standards in most homes. Other times there is old plank flooring beneath a layer of plywood. This is a wild card. since the engineering tables usually don`t include the value for planks in their calculation. but common sense says it does add some stiffness.
Measure Everything. The next step of your ceramic tile flooring installation is the accurate measuring of your floor and your tiles. This is necessary for you to be able to calculate exactly how many tiles you will need. You must measure the length and width of the section of floor you are going to tile and also the length and width of each tile. Then you must calculate. using these numbers. exactly how many tiles you are going to use. which will depend on the orientation of each tile as you have decided to place it on the floor. as well. Then you must find the mid-points of the length and the width of the floor you want to carry out your ceramic tile flooring installation process on; connect these midpoints to form a plus across the floor space. The intersection of the two lines of the plus is the center of your floor space; it is here that you must begin your ceramic tile flooring installation.
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation. you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks. you must repair them. If any crack is too large to repair. that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
There are at least five good reasons tile surpassed linoleum as the flooring of choice: As you have just read. it is straightforward to install. You`ll be delighted with the efficiency of tile floor installation. It`s not unusual to lay a kitchen in less than one day. a bath in half that time. An expert tile contractor has fit and detail foremost in mind. and will never rush. but experience contributes efficiency to your project.