Home / Tile Floors / ceramic tile flooring that looks like wood planks / Morning Star Bamboo Lumber Liquidators Formaldehyde Product Reviews And Ratings Warranty Flooring Silver Strand Bam Ceramic Tile That Looks Like Wood Planks
ggpk Tile Floors July 09th, 2018 - 17:51:38
What condition does the wood appear to be in? Even if the amount of wood support seems adequate according to the tables. if it appears to have been water damaged. if sections of it look moldy or corroded due to rot or decay. it`s not doing its job. Options include replacing or reinforcing it. but not just ignoring it. Also. has it been cut into in various spots. such as a plumber cutting sections of the joists for positioning pipes? All of these problems can make the wood less effective.
Tile floor installation adds resale value to your home. because buyers know they are acquiring a house with an incredibly long-lasting floor. Potential buyers take notice of a well installed and designed tile floor. It makes a statement about how you have cared for your home. With its attractive style and impressive presentation. a good tile floor can add thousands of dollars in potential value.
There are formulas used in the industry to determine if the subfloor has excessive `deflection` [bounciness. lack of rigidity]. The most cited one is the Tile Council of North America standard for deflection. which is stated as L/360 as a minimum. before tile underlayment is installed. L/360 means that the floor should not bend under weight more than the length (expressed in inches) of the unsupported span divided by 360. For example. if the span between supports runs for 20 feet then the deflection should not be more than 2/3" between the center and the end. L=20 x 12" = 240". L/360 = 240"/360 or 2/3". So 2/3" is the maximum amount of movement the center of the span should be allowed to move.
Can you cut into the layers on top to get a cross section of the existing floor? If there is a heating grate that you can remove. that may show the layers the floor is composed of. What will be reassuring to see is a thick layer. ideally over 1 ½ inches thick of plywood. Alternatively. with the property owner`s permission. we sometimes cut in to it to check what it`s composed of.