ggpk Tile Floors July 10th, 2018 - 18:23:49
Ceramic Tile Flooring - Remodeling Over Wood Subfloors. Before you can install a ceramic tile or stone floor. you need to know if the subfloor is even capable of supporting tile. Simply put. tile can be a durable. low maintenance. beautiful floor choice...if it`s on a solid substrate. Or it can be an expensive mistake that cracks. breaks and requires multiple repairs that may never work if the subfloor is not prepared correctly. What factors do you need to look out for to decide if tile is right for your project. and what steps can be taken to insure a trouble free installation?
Glazed and Unglazed Tiles. Firstly. there are glazed and unglazed tiles; the glazed tiles can be cleaned very easily and do not stain as often as unglazed tiles. All you need to do is run a mop soaked in warm water with a mild detergent solution across them from time to time. The problem with glazed tiles is that they are very smooth and therefore can be quite slippery. This is dangerous. especially if the kitchen area is prone to water spillage or if there are young children in your home. To avoid this. you could choose unglazed tiles over glazed ones. Unglazed tiles will prevent the floor from being slippery and have an aesthetically pleasing textured surface. Then again. unglazed tiles will not be as durable as glazed ones - they will be relatively more prone to damage because they are not protected by that extra layer of glazing.
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation. you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks. you must repair them. If any crack is too large to repair. that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
Ceramic Tile Flooring Installation - How to Get it Right by Yourself. Before you can begin your ceramic tile flooring installation. you must make sure that the tiles you have chosen are well-suited for the section of the house you are going to use them for. Ceramic tile flooring is resistant to moisture. water spillage and sudden extreme changes in temperature and are usually used in bathrooms or kitchens. and sometimes in other areas of the house as well. Once you have made sure of the section of flooring that you will use ceramic tiling for and also the tiles that you want to use - you are ready to begin.