ggpk Tile Floors July 10th, 2018 - 18:23:30
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation. you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks. you must repair them. If any crack is too large to repair. that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
Knowing the kind of subfloor you`ll be installing ceramic tile flooring over is important. There are three main types of subfloors you might encounter: Vinyl. plywood. and concrete floors. Installing ceramic tile flooring directly to your vinyl or linoleum subfloor surfaces is greatly discouraged. One. it may contain asbestos fibers; and two. vinyl flooring is not a solid as good ol` concrete flooring. When installing ceramic tile on vinyl. experts would recommend rough-sanding. or scarifying. the vinyl floor surface first so your tiling mortar has good grip to set on.
In residential settings. the most common substrates [surfaces to be tiled] for flooring are wood and cement. In this article we`ll deal with deal with wood subfloors. In new construction. it`s often possible to see the structure of the subfloor and joists and usually communicate with the carpenters who built them or the contractor in charge of the project if there are any questions. In remodeling. however. sometimes one can only guess who installed the floor and how strong it is. Maybe it`s as strong as a battleship. or maybe it`s about to fall through to the basement. If a property owner is trying to install the floor himself. he or she may wonder how to know if the subfloor is strong enough. Let`s start with the technical and then translate it to the everyday way to tell.
If a subfloor displays excessive deflection. it can usually be remedied by installing more plywood on top of it before tile is laid. and by reinforcing the joists from below. While it may make the floor higher than before. think of it as a sort of `insurance policy` against flooring failure.