ggpk Tile Floors July 10th, 2018 - 18:23:22
The first thing to do is to make sure that the tools you will use are ready at hand. These tools should include basic carpentry tools like an accurate measuring tape. a carpenter`s square and a bubble level. You should also be prepared with the tiles and all you need to space them and put them together: tile spaces. a tile cutter. a trowel. and a putty knife. Then you must get your adhesives ready: tile bonding material. thin set mortar or tile adhesive. the sealant. the grout and a rubber grout float. Also you must make sure that you are wearing work clothes or overalls. glasses and heavy-duty gloves for safety.
Ceramic Tile Flooring Installation - How to Get it Right by Yourself. Before you can begin your ceramic tile flooring installation. you must make sure that the tiles you have chosen are well-suited for the section of the house you are going to use them for. Ceramic tile flooring is resistant to moisture. water spillage and sudden extreme changes in temperature and are usually used in bathrooms or kitchens. and sometimes in other areas of the house as well. Once you have made sure of the section of flooring that you will use ceramic tiling for and also the tiles that you want to use - you are ready to begin.
How thick is the subfloor and what is it made of? In new construction. ¾ inch plywood or Oriented Strand Board is a standard subfloor over joists that are 16 inches on center apart. We find that is almost never enough to meet the deflection standards in most homes. Other times there is old plank flooring beneath a layer of plywood. This is a wild card. since the engineering tables usually don`t include the value for planks in their calculation. but common sense says it does add some stiffness.
What condition does the wood appear to be in? Even if the amount of wood support seems adequate according to the tables. if it appears to have been water damaged. if sections of it look moldy or corroded due to rot or decay. it`s not doing its job. Options include replacing or reinforcing it. but not just ignoring it. Also. has it been cut into in various spots. such as a plumber cutting sections of the joists for positioning pipes? All of these problems can make the wood less effective.