Home / Tile Floors / black and white peel and stick vinyl floor tiles / Black White Vinyl Floor Tiles Self Stick | Tiles Flooring With Extravagant Black Vinyl Floor Tiles Self Adhesive For Your Home Concept
ggpk Tile Floors July 10th, 2018 - 18:22:39
What condition does the wood appear to be in? Even if the amount of wood support seems adequate according to the tables. if it appears to have been water damaged. if sections of it look moldy or corroded due to rot or decay. it`s not doing its job. Options include replacing or reinforcing it. but not just ignoring it. Also. has it been cut into in various spots. such as a plumber cutting sections of the joists for positioning pipes? All of these problems can make the wood less effective.
The first thing to do is to make sure that the tools you will use are ready at hand. These tools should include basic carpentry tools like an accurate measuring tape. a carpenter`s square and a bubble level. You should also be prepared with the tiles and all you need to space them and put them together: tile spaces. a tile cutter. a trowel. and a putty knife. Then you must get your adhesives ready: tile bonding material. thin set mortar or tile adhesive. the sealant. the grout and a rubber grout float. Also you must make sure that you are wearing work clothes or overalls. glasses and heavy-duty gloves for safety.
What floor covering was on the floor before? If it had ceramic tile or stone. and the floor received reasonable traffic for years with no cracking or broken grout. it`s a pretty good bet that the subfloor is up to the job. If it was vinyl. carpet or hardwood. we are still in the dark.
There are formulas used in the industry to determine if the subfloor has excessive `deflection` [bounciness. lack of rigidity]. The most cited one is the Tile Council of North America standard for deflection. which is stated as L/360 as a minimum. before tile underlayment is installed. L/360 means that the floor should not bend under weight more than the length (expressed in inches) of the unsupported span divided by 360. For example. if the span between supports runs for 20 feet then the deflection should not be more than 2/3" between the center and the end. L=20 x 12" = 240". L/360 = 240"/360 or 2/3". So 2/3" is the maximum amount of movement the center of the span should be allowed to move.