Home / Tile Floors / black and white peel and stick vinyl floor tiles / Black And White Vinyl Stick Floor Tiles Self Glue Down Floo Peel Tile Cheap Adhesive Solid Color Squares Flooring Garage Covering On
ggpk Tile Floors July 10th, 2018 - 18:22:38
Glazed and Unglazed Tiles. Firstly. there are glazed and unglazed tiles; the glazed tiles can be cleaned very easily and do not stain as often as unglazed tiles. All you need to do is run a mop soaked in warm water with a mild detergent solution across them from time to time. The problem with glazed tiles is that they are very smooth and therefore can be quite slippery. This is dangerous. especially if the kitchen area is prone to water spillage or if there are young children in your home. To avoid this. you could choose unglazed tiles over glazed ones. Unglazed tiles will prevent the floor from being slippery and have an aesthetically pleasing textured surface. Then again. unglazed tiles will not be as durable as glazed ones - they will be relatively more prone to damage because they are not protected by that extra layer of glazing.
Knowing the kind of subfloor you`ll be installing ceramic tile flooring over is important. There are three main types of subfloors you might encounter: Vinyl. plywood. and concrete floors. Installing ceramic tile flooring directly to your vinyl or linoleum subfloor surfaces is greatly discouraged. One. it may contain asbestos fibers; and two. vinyl flooring is not a solid as good ol` concrete flooring. When installing ceramic tile on vinyl. experts would recommend rough-sanding. or scarifying. the vinyl floor surface first so your tiling mortar has good grip to set on.
What condition does the wood appear to be in? Even if the amount of wood support seems adequate according to the tables. if it appears to have been water damaged. if sections of it look moldy or corroded due to rot or decay. it`s not doing its job. Options include replacing or reinforcing it. but not just ignoring it. Also. has it been cut into in various spots. such as a plumber cutting sections of the joists for positioning pipes? All of these problems can make the wood less effective.
Can you cut into the layers on top to get a cross section of the existing floor? If there is a heating grate that you can remove. that may show the layers the floor is composed of. What will be reassuring to see is a thick layer. ideally over 1 ½ inches thick of plywood. Alternatively. with the property owner`s permission. we sometimes cut in to it to check what it`s composed of.