ggpk Tile Floors July 25th, 2018 - 08:14:15
What floor covering was on the floor before? If it had ceramic tile or stone. and the floor received reasonable traffic for years with no cracking or broken grout. it`s a pretty good bet that the subfloor is up to the job. If it was vinyl. carpet or hardwood. we are still in the dark.
What`s the property owner`s risk tolerance? Does he/she want to be rock solid sure of the stability of the floor? Even if that means spending extra money and/or time to reinforce the floor. and accepting a floor that may sit higher than surrounding floors? Or is some risk of failure acceptable if the floor is not built to the righteous standards of the TCNA? Sometimes the extra effort is not worth the cost to the property owner. who should be fully informed on all options. Contractors who install flooring shouldn`t assume that clients don`t care enough to solve the problem: in the last year we`ve had two clients who spend thousands of extra dollars to reinforce subfloors in a kitchen and laundry room when we explained that their floors were too unstable for tile. They really wanted tile. and were willing to make the subfloor ready for it. even if it cost more.
There are at least five good reasons tile surpassed linoleum as the flooring of choice: As you have just read. it is straightforward to install. You`ll be delighted with the efficiency of tile floor installation. It`s not unusual to lay a kitchen in less than one day. a bath in half that time. An expert tile contractor has fit and detail foremost in mind. and will never rush. but experience contributes efficiency to your project.
For plywood subfloors. be sure that the wood is at least 1 and 1/8 inches thick and is supported by an equally strong underlayment. Otherwise. your ceramic tiles will dislodge easily. or worse. break and need replacing. Concrete floors are the most ideal subfloor surface to work with. But before you can start installing ceramic tile flooring over it. it must be cleaned thoroughly. For dust and other debris. sweep and then mop your concrete subfloor surface. and allow it to dry completely. Smooth concrete surfaces must be rough sanded just like vinyl floors to allow the tiling mortar some grip.