ggpk Tile Floors July 11th, 2018 - 18:55:44
You also have ceramic tiles. This kind of tile is the inexpensive way to achieve the look of granite or marble floors. They can give the effect of having water on your floors that`s oh so dramatic. Another kind of tile you can use as flooring is metal tile. These are either industrial gratings or stainless steel. If you want your floor to have the look of brass. bronze or steel. this is the one to go for. You can mix and match this tile with other kinds of tiles to accent the floor and create a point of interest in the room.
Measure Everything. The next step of your ceramic tile flooring installation is the accurate measuring of your floor and your tiles. This is necessary for you to be able to calculate exactly how many tiles you will need. You must measure the length and width of the section of floor you are going to tile and also the length and width of each tile. Then you must calculate. using these numbers. exactly how many tiles you are going to use. which will depend on the orientation of each tile as you have decided to place it on the floor. as well. Then you must find the mid-points of the length and the width of the floor you want to carry out your ceramic tile flooring installation process on; connect these midpoints to form a plus across the floor space. The intersection of the two lines of the plus is the center of your floor space; it is here that you must begin your ceramic tile flooring installation.
For plywood subfloors. be sure that the wood is at least 1 and 1/8 inches thick and is supported by an equally strong underlayment. Otherwise. your ceramic tiles will dislodge easily. or worse. break and need replacing. Concrete floors are the most ideal subfloor surface to work with. But before you can start installing ceramic tile flooring over it. it must be cleaned thoroughly. For dust and other debris. sweep and then mop your concrete subfloor surface. and allow it to dry completely. Smooth concrete surfaces must be rough sanded just like vinyl floors to allow the tiling mortar some grip.
How thick is the subfloor and what is it made of? In new construction. ¾ inch plywood or Oriented Strand Board is a standard subfloor over joists that are 16 inches on center apart. We find that is almost never enough to meet the deflection standards in most homes. Other times there is old plank flooring beneath a layer of plywood. This is a wild card. since the engineering tables usually don`t include the value for planks in their calculation. but common sense says it does add some stiffness.