Home / Tile Floors / bathroom tile flooring ideas for small bathrooms / Dark Brown Tile Flooring Ideas For Small Bathrooms With Soft Blue Wall Color And Antique Towel Holder Bathroom Paint Colors Compact Shower Remodel Renovation Space
ggpk Tile Floors July 09th, 2018 - 18:13:09
How thick is the subfloor and what is it made of? In new construction. ¾ inch plywood or Oriented Strand Board is a standard subfloor over joists that are 16 inches on center apart. We find that is almost never enough to meet the deflection standards in most homes. Other times there is old plank flooring beneath a layer of plywood. This is a wild card. since the engineering tables usually don`t include the value for planks in their calculation. but common sense says it does add some stiffness.
How tough is the tile to be installed? Fairly thick quarry tiles. for example. may be rated for heavy duty industrial applications. although they are often installed in homes. Because they are thicker than normal tiles and able to withstand heavy traffic. they may be less prone to cracking than a sensitive. thinner tile. For that matter. natural stone such as marble and granite are on the other end of the spectrum - they crack even easier than ceramic tile and should not be used in settings where any excess deflection is possible. Intuition may tell you they are stronger than ceramic. but in fact they are more brittle and prone to cracking. They need twice as rigid a floor as ceramic.
You also have ceramic tiles. This kind of tile is the inexpensive way to achieve the look of granite or marble floors. They can give the effect of having water on your floors that`s oh so dramatic. Another kind of tile you can use as flooring is metal tile. These are either industrial gratings or stainless steel. If you want your floor to have the look of brass. bronze or steel. this is the one to go for. You can mix and match this tile with other kinds of tiles to accent the floor and create a point of interest in the room.
Tile floor installation is a clear-cut process. Once your contractor has determined your sub-floor can handle the weight and rigidity of tile. he designs a "map" so that the tile is straight. Next. adhesive is spread. and the tiles are "squished" into it. A level is used on each tile to make certain it is flush. and a rubber mallet can tamp down any spot that`s higher than the rest. Spacers are placed between tiles. until the adhesive dries them into place. Border tiles are cut to size and laid. The spaces are grouted. and when it is dry the tiles are cleaned. and sealed.