ggpk Tile Floors July 12th, 2018 - 17:43:40
Install the Ceramic Tiles. Start with the center and move outwards with each ceramic tile. Use thin set mortar or tile adhesive to set the tiles. make sure that the bond between the tile and the sub-floor sets by applying pressure on each tile. After the tiles have set. complete the process by applying the grout. Remember that the grout must be of the same color as the tiles you have chosen. Remember that each step requires twenty-four hours to set and dry before allowing yourself to proceed to the next step of your ceramic tile flooring installation.
Knowing the kind of subfloor you`ll be installing ceramic tile flooring over is important. There are three main types of subfloors you might encounter: Vinyl. plywood. and concrete floors. Installing ceramic tile flooring directly to your vinyl or linoleum subfloor surfaces is greatly discouraged. One. it may contain asbestos fibers; and two. vinyl flooring is not a solid as good ol` concrete flooring. When installing ceramic tile on vinyl. experts would recommend rough-sanding. or scarifying. the vinyl floor surface first so your tiling mortar has good grip to set on.
Tile floor installation is a clear-cut process. Once your contractor has determined your sub-floor can handle the weight and rigidity of tile. he designs a "map" so that the tile is straight. Next. adhesive is spread. and the tiles are "squished" into it. A level is used on each tile to make certain it is flush. and a rubber mallet can tamp down any spot that`s higher than the rest. Spacers are placed between tiles. until the adhesive dries them into place. Border tiles are cut to size and laid. The spaces are grouted. and when it is dry the tiles are cleaned. and sealed.
The first thing to do is to make sure that the tools you will use are ready at hand. These tools should include basic carpentry tools like an accurate measuring tape. a carpenter`s square and a bubble level. You should also be prepared with the tiles and all you need to space them and put them together: tile spaces. a tile cutter. a trowel. and a putty knife. Then you must get your adhesives ready: tile bonding material. thin set mortar or tile adhesive. the sealant. the grout and a rubber grout float. Also you must make sure that you are wearing work clothes or overalls. glasses and heavy-duty gloves for safety.