ggpk Tile Floors July 09th, 2018 - 18:15:52
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation. you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks. you must repair them. If any crack is too large to repair. that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
Tile floor installation is a clear-cut process. Once your contractor has determined your sub-floor can handle the weight and rigidity of tile. he designs a "map" so that the tile is straight. Next. adhesive is spread. and the tiles are "squished" into it. A level is used on each tile to make certain it is flush. and a rubber mallet can tamp down any spot that`s higher than the rest. Spacers are placed between tiles. until the adhesive dries them into place. Border tiles are cut to size and laid. The spaces are grouted. and when it is dry the tiles are cleaned. and sealed.
Glazed and Unglazed Tiles. Firstly. there are glazed and unglazed tiles; the glazed tiles can be cleaned very easily and do not stain as often as unglazed tiles. All you need to do is run a mop soaked in warm water with a mild detergent solution across them from time to time. The problem with glazed tiles is that they are very smooth and therefore can be quite slippery. This is dangerous. especially if the kitchen area is prone to water spillage or if there are young children in your home. To avoid this. you could choose unglazed tiles over glazed ones. Unglazed tiles will prevent the floor from being slippery and have an aesthetically pleasing textured surface. Then again. unglazed tiles will not be as durable as glazed ones - they will be relatively more prone to damage because they are not protected by that extra layer of glazing.
First. you have porcelain tiles. These tiles are made by firing at high temperatures. They are also very dense and moisture resistant. You can purchase porcelain in a variety of shades and colors. Porcelain tiles are the most expensive though but with them you have tile flooring ideas that can mimic stone and other materials.